Safety lock and performance test of gondola

1. Safety lock for gondola. The performance of the safety lock should be tested for each operation. The specific methods are:
Action 1: Gently lift the safety wire rope by hand, it should be able to move slowly. When the locking handle is pulled, the starting handle cannot be moved as soon as the action is performed, and the action can be performed as soon as the action is performed. Repeat several times.
Action 2: Pull up the safety wire rope at a fast and violent speed, the safety lock should be able to lock, pull the handle to open, repeat the action two or more times, and there should be no malfunction.
The security lock must be held within the limits of the qualification certificate to be tested. If there is a failure, it can be sent to the manufacturer for repair. It is strictly forbidden for the user to dismantle and repair it. If the accident is not handled according to the above, the manufacturer is not responsible.
2. Working wire rope and safety wire rope of electric hanging basket.
Working wire ropes and safety wire ropes are the main components that bear the load of the gondola, so there are strict requirements for the wire ropes used. The working steel wire rope and safety steel wire rope of the electric gondola are made of galvanized steel wire rope for the gondola, which has the characteristics of high strength and good anti-rust performance.
In order to avoid loosening of the rope head and easy to wear the hoist and safety lock, after the steel wire rope is cut according to the selected length, its two ends are specially processed, and the wearing end is welded and polished into a bullet-shaped cone.